Artículo

Cabrera, J.N.; Ruiz, M.M.; Fascio, M.; D'Accorso, N.; Minchev, R.; Dubois, P.; Lizarraga, L.; Negri, R.M. "Increased surface roughness in polydimethylsiloxane films by physical and chemical methods" (2017) Polymers. 9(8):331
Estamos trabajando para incorporar este artículo al repositorio
Consulte el artículo en la página del editor
Consulte la política de Acceso Abierto del editor

Abstract:

Two methods, the first physical and the other chemical, were investigated to modify the surface roughness of polydimethylsiloxane (PDMS) films. The physical method consisted of dispersing multi-walled carbon nanotubes (MWCNTs) and magnetic cobalt ferrites (CoFe2O4) prior to thermal cross-linking, and curing the composite system in the presence of a uniform magnetic field H. The chemical method was based on exposing the films to bromine vapours and then UV-irradiating. The characterizing techniques included scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS), Fourier transform infrared (FTIR) spectroscopy, optical microscopy, atomic force microscopy (AFM) and magnetic force microscopy (MFM). The surface roughness was quantitatively analyzed by AFM. In the physical method, the random dispersion of MWCNTs (1% w/w) and magnetic nanoparticles (2% w/w) generated a roughness increase of about 200% (with respect to PDMS films without any treatment), but that change was 400% for films cured in the presence of H perpendicular to the surface. SEM, AFM and MFM showed that the magnetic particles always remained attached to the carbon nanotubes, and the effect on the roughness was interpreted as being due to a rupture of dispersion randomness and a possible induction of structuring in the direction of H. In the chemical method, the increase in roughness was even greater (1000%). Wells were generated with surface areas that were close to 100 µm and depths of up to 500 nm. The observations of AFM images and FTIR spectra were in agreement with the hypothesis of etching by Br radicals generated by UV on the polymer chains. Both methods induced important changes in the surface roughness (the chemical method generated the greatest changes due to the formation of surface wells), which are of great importance in superficial technological processes. © 2017 by the authors.

Registro:

Documento: Artículo
Título:Increased surface roughness in polydimethylsiloxane films by physical and chemical methods
Autor:Cabrera, J.N.; Ruiz, M.M.; Fascio, M.; D'Accorso, N.; Minchev, R.; Dubois, P.; Lizarraga, L.; Negri, R.M.
Filiación:Instituto de Química Física de Materiales, Ambiente y Energía (INQUIMAE), Ciudad Autónoma de Buenos Aires, C1428EGA, Argentina
Departamento de Química Inorgánica, Analítica y Química Física, Facultad de Ciencias Exactas y Naturales, Universidad de Buenos Aires (UBA), Ciudad Autónoma de Buenos Aires, C1428EGA, Argentina
Centro de Investigación en Hidratos de Carbono (CIHIDECAR-CONICET), Ciudad Autónoma de Buenos Aires, C1428EGA, Argentina
Departamento de Química Orgánica, Facultad de Ciencias Exactas y Naturales, UBA, Ciudad Autónoma de Buenos Aires, C1428EGA, Argentina
Center of Innovation and Research in Materials & Polymers (CIRMAP), University of Mons, Mons, 7000, Belgium
Centro de Investigaciones en Bionanociencias (CIBION-CONICET), Godoy Cruz 2390, 1st Floor, Ciudad Autónoma de Buenos Aires, C1425FQD, Argentina
Palabras clave:Composites; Roughness; Magnetism; Bromine; Atomic force microscopy; Bromine; Carbon; Carbon films; Carbon nanotubes; Composite films; Curing; Dispersions; Energy dispersive spectroscopy; Fourier transform infrared spectroscopy; Magnetic fields; Magnetic force microscopy; Magnetism; Microchannels; Multiwalled carbon nanotubes (MWCN); Nanocomposite films; Nanomagnetics; Nanoparticles; Nanotubes; Plastic films; Polydimethylsiloxane; Scanning electron microscopy; Silicones; Yarn; Energy dispersive spectroscopies (EDS); Magnetic force microscopies (MFM); Magnetic nano-particles; Polydimethylsiloxane PDMS; Random dispersions; Technological process; Thermal crosslinking; Uniform magnetic fields; Surface roughness
Año:2017
Volumen:9
Número:8
Página de inicio:331
DOI: http://dx.doi.org/10.3390/polym9080331
Título revista:Polymers
Título revista abreviado:Polym.
ISSN:20734360
Registro:https://bibliotecadigital.exactas.uba.ar/collection/paper/document/paper_20734360_v9_n8_p331_Cabrera

Referencias:

  • Zhou, B., Tian, J., Wang, C., Gao, Y., Wen, W., A facile and cost-effective approach to engineer surface roughness for preparation of large-scale superhydrophobic substrate with high adhesive force (2016) Appl. Surf. Sci., 389, pp. 679-687
  • Söz, C.K., Yilgör, E., Yilgör, I., Influence of the average surface roughness on the formation of superhydrophobic polymer surfaces through spin-coating with hydrophobic fumed silica (2015) Polymer, 62, pp. 118-128
  • Wong, I., Ho, C.M., Surface molecular property modifications for poly(dimethylsiloxane) (PDMS) based microfluidic devices (2009) Microfluid. Nanofluid., 7, pp. 291-306
  • Jian, A., Tang, X., Feng, Q., Duan, Q., Ji, J., Ma, Z., Zhang, W., Sang, S., A PDMS surface stress biosensor with optimized micro-membrane: Fabrication and application (2017) Sens. Actuators B, 242, pp. 969-976
  • Zhang, Y., Karasu, F., Rocco, C., van der Ven, L.G.J., van Benthem, R.A.T.M., Allonas, X., Croutxe-Barghorn, C., de With, G., PDMS-based self-replenishing coatings (2016) Polymer, 107, pp. 249-262
  • Beigbeder, A., Mincheva, R., Pettitt, M.E., Callow, M.E., Callow, J.A., Claes, M., Dubois, P., Marine fouling release silicone/carbon nanotube nanocomposite coatings: On the importance of the nanotube dispersion state (2010) J. Nanosci. Nanotechnol., 10, pp. 2972-2978
  • Su, Y.G., Chen, F., Wu, C.Y., Chang, M.H., Effect of surface roughness of chill wheel on ribbon formation in the planar flow casting process (2016) J. Mater. Process. Technol., 229, pp. 609-613
  • Ammar, Y., Swailes, D., Bridgens, B., Chen, J., Influence of surface roughness on the initial formation of biofilm (2015) Surf. Coat. Technol., 284, pp. 410-416
  • Bullock, S., Johnston, E.E., Wilson, T., Gatenholm, P., Wynne, K.J., Surface science of a filled polydimethylsiloxane-based alkoxysilane-cured elastomer: RTV11 (1999) J. Colloid Int. Sci., 210, p. 18
  • Beigbeder, A., Linares, M., Devalckenaere, M., Degée, P., Claes, M., Beljonne, D., Lazzaroni, R., Dubois, P., CH-pi Interactions as the Driving Force for Silicone-Based Nanocomposites with Exceptional Properties (2008) Adv. Mater., 20, p. 1003
  • Beigbeder, A., Degée, P., Conlan, S.L., Mutton, R., Clare, A.S., Pettitt, M.E., Callow, M.E., Dubois, P., Preparation and characterisation of silicone-based coatings filled with carbon nanotubes and natural sepiolite and their application as marine fouling-release coatings (2008) Biofouling, 24, pp. 291-302
  • Ochs, H., Vogelsang, J., Meyer, G., Enhanced surface roughness of organic coatings due to UV-degradation: An unknown source of EIS-artifacts (2003) Prog. Org. Coat., 46, pp. 182-190
  • Hu, S., Ren, X., Bachman, M., Sims, C.E., Li, G.P., Allbritton, N.L., Surface-Directed, Graft Polymerization within Microfluidic Channels (2004) Anal. Chem., 76, pp. 1865-1870
  • Richey, T., Iwata, H., Oowaki, H., Uchida, E., Matsuda, S., Ikada, Y., Surface modification of polyethylene balloon catheters for local drug delivery (2000) Biomaterials, 21, pp. 1057-1065
  • Efimenko, K., Wallace, W.E., Genzer, J., Surface modification of Sylgard-184 poly(dimethylsiloxane) networks by ultraviolet and ultraviolet/ozone treatment (2002) J. Colloid Interface Sci., 254, pp. 306-315
  • Hillborg, H., Tomczak, N., Olah, A., Schönherr, H., Vancso, G.J., Nanoscale hydrophobic recovery: A chemical force microscopy study of UV/ozone treated cross-linked poly(dimethylsiloxane) (2004) Langmuir, 20, pp. 785-794
  • Ye, H., Gu, Z., Gracias, D.H., Kinetics of ultraviolet and plasma surface modification of poly(dimethylsiloxane) probed by sum frequency vibrational spectroscopy (2006) Langmuir, 22, pp. 1863-1868
  • Juárez-Moreno, A.J., Ávila-Ortega, A., Oliva, A.I., Avilés, F., Cauich-Rodríguez, J.V., Effect of wettability and surface roughness on the adhesion properties of collagen on PDMS films treated by capacitively coupled oxygen plasma (2015) Appl. Surf. Sci., 349, pp. 763-773
  • Kwon, O.M., See, S.J., Kim, S.S., Hwang, H.Y., Effects of surface treatment with coupling agents of PVDF-HFP fibers on the improvement of the adhesion characteristics on PDMS (2014) Appl. Surf. Sci., 321, pp. 378-386
  • Ferhan, A.R., Zainol, N., Kim, D.-H., A facile method towards rough morphology polymer brush for increased mobility of embedded nanoparticles (2015) Polymer, 75, pp. 57-63
  • Li, J., Wang, M., Shen, Y., Chemical modification on top of nanotopography to enhance surface properties of PDMS (2012) Surf. Coat. Technol., 206, pp. 2161-2167
  • Jang, Y., Seo, J.-W., Seok, J., Lee, J.-Y., Kim, K., Roughening Conjugated Polymer Surface for Enhancing the Charge Collection Efficiency of Sequentially Deposited Polymer/Fullerene Photovoltaics (2015) Polymers, 7, pp. 1497-1509
  • Scaffaro, R., Maio, A., Lopresti, F., Botta, L., Nanocarbons in Electrospun Polymeric Nanomats for Tissue Engineering: A Review (2017) Polymers, 9, p. 76
  • Khelifa, F., Habibi, Y., Leclere, P., Dubois, P., Convection-assisted assembly of cellulose nanowhiskers embedded in an acrylic copolymer (2013) Nanoscale, 5, pp. 1082-1090
  • Khelifa, F., Druart, M.E., Habibi, Y., Benard, F., Leclere, P., Olivier, M., Dubois, P., Sol-gel incorporation of silica nanofillers for tuning the anti-corrosion protection of acrylate-based coatings (2013) Prog. Org. Coat., 76, pp. 900-911
  • Chakrabarty, S., Zhang, X., Bharti, P., Chujo, Y., Miyake, J., Wynne, K.J., Yadavalli, V., Processing dependence of surface morphology in condensation cured PDMS nanocomposites (2010) Polymer, 51, pp. 5756-5763
  • Khelifa, F.K., Druart, M.E., Hhabibi, Y., Rioboo, R., Olivier, M., de Coninck, J., Dubois, P., Effect of photo-crosslinking on the performances of silica nanoparticle-filled epoxidized acrylic copolymers coating (2013) J. Mater. Chem. A, 1, pp. 13334-13344
  • Beigbeder, A., Jeusette, M., Mincheva, R., Claes, M., Brocorens, P., Lazzaaroni, R., On the effect of carbon nanotubes on the wettability and surface morphology of hydrosilylation-curing silicone coatings (2009) J. Nanostruct. Polym. Nanocomp., 5, pp. 37-43
  • Antonel, P.S., Jorge, G.A., Perez, O., Butera, A., Leyva, G., Martín Negri, R., Magnetic and Elastic Properties of CoFe2O4-PDMS Magnetically Oriented Elastomer Nanocomposites (2011) J. Appl. Phys., 110, pp. 43920-43928
  • Antonel, P.S., Oliveira, C.L.P., Jorge, G.A., Perez, O.E., Leyva, A.G., Negri, R.M., Synthesis and Characterization of CoFe2O4 Magnetic Nanotubes, Nanorods and Nanowires. Formation of Magnetic Structured Elastomers by Magnetic-Field Induced Alignment of CoFe2O4 Nanorods (2015) J. Nanopart. Res., 17, pp. 294-307
  • Mietta, J.L., Ruiz, M.M., Antonel, P.S., Perez, O.E., Butera, A., Jorge, G.A., Negri, R.M., Anisotropic Magnetoresistance and Piezoresistivity in Structured Fe3O4-Silver Particles in PDMS Elastomers at Room Temperature (2012) Langmuir, 28, pp. 6985-6996
  • Mietta, J.L., Jorge, G., Perez, O.E., Maeder, T., Negri, R.M., Superparamagnetic anisotropic elastomer connectors exhibiting reversible magneto-piezoresistivity (2013) Sens. Actuators A, 192, pp. 34-41
  • Mietta, J.L., Jorge, G., Negri, R.M., A flexible strain gauge exhibiting reversible piezoresistivity based on an anisotropic magnetorheological polymer (2014) Smart Mater. Struct., 23, pp. 85026-85038
  • Mietta, J.L., Tamborenea, P.I., Negri, R.M., Anisotropic Magnetoresistivity in Structured Elastomer Composites: Modelling and Experiments (2016) Soft Matter, 12, pp. 6430-6441
  • Landa, R.A., Antonel, P.S., Ruiz, M.M., Perez, O.E., Butera, A., Jorge, G., Oliveira, C.L.P., Negri, R.M., Magnetic and Elastic Anisotropy in Magnetorheological Elastomers using Nickel-based Nanoparticles and Nanochains (2013) J. Appl. Phys., 114, p. 213912
  • Ruiz, M.M., Marchi, M.C., Perez, O.E., Jorge, G.A., Fascio, M., D'Accorso, N., Negri, R.M., Structured elastomeric submillimeter films displaying magneto and piezo resistivity (2015) J. Polym. Sci. B, 53, pp. 574-586
  • Saleh Medina, L.S., Jorge, G.A., Rubi, D., D'Accorso, N., Negri, R.M., SBR/BiFeO3 Elastomer Capacitor Films Prepared under Magnetic and Electric Fields Displaying Magnetoelectric Coupling (2015) J. Phys. Chem. C, 119, pp. 23319-23328
  • Ruiz, M.M., Antonel, P.S., Perez, O.E., Negri, R.M., Jorge, G., Structural and magnetic properties of Fe2-xCoSmxO4—Nanoparticles and Fe2-xCoSmxO4—PDMS magnetoelastomers as a function of Sm content (2012) J. Magn. Magn. Mater., 327, pp. 11-19
  • Fischer, J., Bingle, J., The Vapor Pressure of Bromine from 24 to 116 (1955) J. Am. Chem. Soc., 77, pp. 6511-6512
  • Puntes, V.F., Gorostiza, P., Aruguete, D.M., Bastus, N.G., Alivisatos, A.P., Collective behaviour in two-dimensional cobalt nanoparticle assemblies observed by magnetic force microscopy (2004) Nat. Mater., 3, pp. 263-268
  • Bellamy, L.J., (1980) The infrared spectra of complex molecules. In Advances in Infrared Group Frequencies, 2. , Springer: Berlin, Germany
  • Shahzad, M.I., Giorcelli, M., Shahzad, N., Guastella, S., Castellino, M., Jagdale, P., Tagliaferro, A., Study of carbon nanotubes based Polydimethylsiloxane composite films (2013) J. Phys. Conf. Ser., 439, p. 012010

Citas:

---------- APA ----------
Cabrera, J.N., Ruiz, M.M., Fascio, M., D'Accorso, N., Minchev, R., Dubois, P., Lizarraga, L.,..., Negri, R.M. (2017) . Increased surface roughness in polydimethylsiloxane films by physical and chemical methods. Polymers, 9(8), 331.
http://dx.doi.org/10.3390/polym9080331
---------- CHICAGO ----------
Cabrera, J.N., Ruiz, M.M., Fascio, M., D'Accorso, N., Minchev, R., Dubois, P., et al. "Increased surface roughness in polydimethylsiloxane films by physical and chemical methods" . Polymers 9, no. 8 (2017) : 331.
http://dx.doi.org/10.3390/polym9080331
---------- MLA ----------
Cabrera, J.N., Ruiz, M.M., Fascio, M., D'Accorso, N., Minchev, R., Dubois, P., et al. "Increased surface roughness in polydimethylsiloxane films by physical and chemical methods" . Polymers, vol. 9, no. 8, 2017, pp. 331.
http://dx.doi.org/10.3390/polym9080331
---------- VANCOUVER ----------
Cabrera, J.N., Ruiz, M.M., Fascio, M., D'Accorso, N., Minchev, R., Dubois, P., et al. Increased surface roughness in polydimethylsiloxane films by physical and chemical methods. Polym. 2017;9(8):331.
http://dx.doi.org/10.3390/polym9080331