Artículo

Estamos trabajando para incorporar este artículo al repositorio
Consulte el artículo en la página del editor
Consulte la política de Acceso Abierto del editor

Abstract:

A constitutive model for the anisotropic magnetoresistivity in structured elastomer composites (SECs) is proposed. The SECs considered here are oriented pseudo-chains of conductive-magnetic inorganic materials inside an elastomer organic matrix. The pseudo-chains are formed by fillers which are simultaneously conductive and magnetic dispersed in the polymer before curing or solvent evaporation. The SEC is then prepared in the presence of a uniform magnetic field, referred to as Hcuring. This procedure generates the pseudo-chains, which are preferentially aligned in the direction of Hcuring. Electrical conduction is present in that direction only. The constitutive model for the magnetoresistance considers the magnetic pressure, Pmag, induced on the pseudo-chains by an external magnetic field, H, applied in the direction of the pseudo-chains. The relative changes in conductivity as a function of H are calculated by evaluating the relative increase of the electron tunnelling probability with Pmag, a magneto-elastic coupling which produces an increase of conductivity with magnetization. The model is used to adjust experimental results of magnetoresistance in a specific SEC where the polymer is polydimethylsiloxane, PDMS, and fillers are microparticles of magnetite-silver (referred to as Fe3O4[Ag]). Simulations of the expected response for other materials in both superparamagnetic and blocked magnetic states are presented, showing the influence of the Young's modulus of the matrix and filler's saturation magnetization. © The Royal Society of Chemistry 2016.

Registro:

Documento: Artículo
Título:Anisotropic magnetoresistivity in structured elastomer composites: Modelling and experiments
Autor:Mietta, J.L.; Tamborenea, P.I.; Martin Negri, R.
Filiación:Instituto de Química Física de Materiales, Ambiente y Energía (INQUIMAE), Departamento de Química Inorgánica, Analítica y Química Física, Facultad de Ciencias Exactas y Naturales, Universidad de Buenos Aires, Argentina
Departamento de Física, Instituto de Física de Buenos Aires (IFIBA), Facultad de Ciencias Exactas y Naturales, Universidad de Buenos Aires, Argentina
Palabras clave:Anisotropy; Chains; Conductive materials; Constitutive models; Curing; Elastic moduli; Elastomers; Magnetic fields; Magnetism; Magnetization; Magnetoresistance; Plastics; Saturation magnetization; Silicones; Silver; Elastomer composites; Electrical conduction; External magnetic field; Inorganic materials; Magnetoelastic couplings; Modelling and experiments; Tunnelling probability; Uniform magnetic fields; Fillers
Año:2016
Volumen:12
Número:30
Página de inicio:6430
Página de fin:6441
DOI: http://dx.doi.org/10.1039/c6sm01173j
Título revista:Soft Matter
Título revista abreviado:Soft Matter
ISSN:1744683X
CODEN:SMOAB
Registro:https://bibliotecadigital.exactas.uba.ar/collection/paper/document/paper_1744683X_v12_n30_p6430_Mietta

Referencias:

  • Bica, I., Liu, Y.D., Choi, H.J., (2013) J. Ind. Eng. Chem., 19, pp. 394-406
  • Mietta, J.L., Jorge, G., Perez, O.E., Maeder, T., Negri, R.M., (2013) Sens. Actuators, A, 192, pp. 34-41
  • Mietta, J.L., Ruiz, M.M., Antonel, P.S., Perez, O.E., Butera, A., Jorge, G., Negri, R.M., (2012) Langmuir, 28, pp. 6985-6996
  • Yu, M., Ju, B., Fu, J., Liu, S., Choi, S.-B., (2014) Ind. Eng. Chem. Res., 53, pp. 4704-4710
  • Kchit, N., Lancon, P., Bossis, G., (2009) J. Phys. D: Appl. Phys., 42, p. 105506
  • Filipcsei, G., Csetneki, I., Szilágyi, A., Zrínyi, M., (2007) Oligomers-Polymer Composites-Molecular Imprinting, pp. 137-189. , Springer
  • Varga, Z., Filipcsei, G., Zrínyi, M., (2005) Polymer, 46, pp. 7779-7787
  • Varga, Z., Filipcsei, G., Zrínyi, M., (2006) Polymer, 47, pp. 227-233
  • Nikitin, L., Stepanov, G., Mironova, L., Gorbunov, A., (2004) J. Magn. Magn. Mater., 272, pp. 2072-2073
  • Nikitin, L., Stepanov, G., Mironova, L., Samus, A., (2003) J. Magn. Magn. Mater., 258, pp. 468-470
  • Nikitin, L., Korolev, D., Stepanov, G., Mironova, L., (2006) J. Magn. Magn. Mater., 300, pp. e234-e238
  • Mietta, J.L., Negri, R.M., Tamborenea, P.I., (2014) J. Phys. Chem. C, 118, pp. 20594-20604
  • Mietta, J.L., Tamborenea, P.I., Negri, R.M., (2016) Soft Matter, 12, pp. 422-431
  • Mietta, J.L., Jorge, G., Negri, R.M., (2014) Smart Mater. Struct., 23, p. 085026
  • Ruiz, M.M., Claudia Marchi, M., Perez, O.E., Jorge, G.E., Fascio, M., D'Accorso, N., Martín Negri, R., (2015) J. Polym. Sci., Part B: Polym. Phys., 53, pp. 574-586
  • Ruiz, M.M., Mietta, J.L., Antonel, P.S., Pérez, O.E., Negri, R.M., Jorge, G., (2013) J. Magn. Magn. Mater., 327, pp. 11-19
  • Antonel, P.S., Jorge, G., Perez, O.E., Butera, A., Leyva, A.G., Negri, R.M., (2011) J. Appl. Phys., 110, p. 043920
  • Wood, D.S., Camp, P.J., (2011) Phys. Rev. E: Stat., Nonlinear, Soft Matter Phys., 83, p. 011402
  • Pessot, G., Weeber, R., Holm, C., Löwen, H., Menzel, A.M., (2015) J. Phys.: Condens. Matter, 27, p. 325105
  • Huang, S., Pessot, G., Cremer, P., Weeber, R., Holm, C., Nowak, J., Odenbach, S., Auernhammer, G.K., (2016) Soft Matter, 12, pp. 228-237
  • Weeber, R., Kantorovich, S., Holm, C., (2015) J. Chem. Phys., 143, p. 154901
  • Ivaneyko, D., Toshchevikov, V., Borin, D., Saphiannikova, M., Heinrich, G., (2014) Macromol. Symp., pp. 96-107
  • Du, F., Fischer, J.E., Winey, K.I., (2005) Phys. Rev. B: Condens. Matter Mater. Phys., 72, p. 121404
  • Amjadi, M., Pichitpajongkit, A., Lee, S., Ryu, S., Park, I., (2014) ACS Nano, 8, pp. 5154-5163
  • Hu, N., Fukunaga, H., Atobe, S., Liu, Y., Li, J., (2011) Sensors, 11, pp. 10691-10723
  • Hu, N., Karube, Y., Yan, C., Masuda, Z., Fukunaga, H., (2008) Acta Mater., 56, pp. 2929-2936
  • Holm, E., Williamson, J., Holm, R., (2010) Electric Contacts: Theory and Application, , Springer, Berlin Heidelberg
  • Samsonov, G., (2012) Handbook of the Physicochemical Properties of the Elements, , Springer, US
  • Kou, X., Wang, W., Fan, X., Shah, L.R., Tao, R., Xiao, J.Q., (2010) J. Appl. Phys., 108, p. 083901
  • Pramanik, S., Stefanita, C.-G., Patibandla, S., Bandyopadhyay, S., Garre, K., Harth, N., Cahay, M., (2007) Nat. Nanotechnol., 2, pp. 216-219
  • Fan, Z., Li, P., Jiang, E., Bai, H., (2012) Carbon, 50, pp. 4470-4475
  • Suzuki, K.Z., Shibuya, Y., Niizeki, T., Yanagihara, H., Kita, E., (2014) IEEE Trans. Magn., 50, pp. 1-4
  • Pauly, M., Dayen, J.-F., Golubev, D., Beaufrand, J.-B., Pichon, B.P., Doudin, B., Bégin-Colin, S., (2012) Small, 8, pp. 108-115
  • Pham, T., Miwa, S., Bang, D., Nozaki, T., Bonell, F., Tamura, E., Mizuochi, N., Suzuki, Y., (2014) Solid State Commun., 183, pp. 18-21
  • Dugay, J., Tan, R.P., Meffre, A., Blon, T., Lacroix, L.-M., Carrey, J., Fazzini, P.F., Respaud, M., (2011) Nano Lett., 11, pp. 5128-5134
  • Montes, J., Cuevas, F., Cintas, J., Urban, P., (2011) Appl. Phys. A: Mater. Sci. Process., 105, pp. 935-947
  • Kchit, N., Bossis, G., (2009) J. Phys. D: Appl. Phys., 42, p. 105505
  • Negri, R.M., Rodriguez, S.D., Bernik, D.L., Molina, F.V., Pilosof, A., Perez, O., (2010) J. Appl. Phys., 107, p. 113703
  • Bubenhofer, S.B., Schumacher, C.M., Koehler, F.M., Luechinger, N.A., Sotiriou, G.A., Grass, R.N., Stark, W.J., (2012) ACS Appl. Mater. Interfaces, 4, pp. 2664-2671
  • Gu, H., Zhang, X., Wei, H., Huang, Y., Wei, S., Guo, Z., (2013) Chem. Soc. Rev., 42, pp. 5907-5943
  • Tsymbal, E.Y., Zutic, I., (2011) Handbook of Spin Transport and Magnetism, , CRC press
  • Chappert, C., Fert, A., Van Dau, F.N., (2007) Nat. Mater., 6, pp. 813-823
  • Simmons, J.G., (1964) J. Appl. Phys., 35, pp. 2655-2658
  • Biller, A., Stolbov, O., Raikher, Y.L., (2014) J. Appl. Phys., 116, p. 114904
  • Liu, T., Gong, X., Xu, Y., Xuan, S., Jiang, W., (2013) Soft Matter, 9, pp. 10069-10080
  • Vokoun, D., Beleggia, M., Heller, L., Šittner, P., (2009) J. Magn. Magn. Mater., 321, pp. 3758-3763
  • Knobel, M., Nunes, W., Socolovsky, L., De Biasi, E., Vargas, J., Denardin, J., (2008) J. Nanosci. Nanotechnol., 8, pp. 2836-2857
  • Amjadi, M., Kyung, K.-U., Park, I., Sitti, M., (2016) Adv. Funct. Mater., 26, pp. 1678-1698
  • Yamada, T., Hayamizu, Y., Yamamoto, Y., Yomogida, Y., Izadi-Najafabadi, A., Futaba, D.N., Hata, K., (2011) Nat. Nanotechnol., 6, pp. 296-301
  • Mattmann, C., Clemens, F., Tröster, G., (2008) Sensors, 8, pp. 3719-3732
  • Zheng, Y., (2008) Liquid Plug Dynamics in Pulmonary Airways, , ProQuest
  • Hui, C., Shia, D., (1998) Polym. Eng. Sci., 38, pp. 774-782
  • Zhao, H., Bai, J., (2015) ACS Appl. Mater. Interfaces, 7, pp. 9652-9659
  • Mark, J., (2007) Physical Properties of Polymers Handbook, , Springer, New York
  • Jiles, D., Atherton, D., (1986) J. Magn. Magn. Mater., 61, pp. 48-60
  • Zhang, Y., Pan, L., Zhu, H., Wang, W., Shah, L.R., Fan, X., Xiao, J.Q., (2010) J. Appl. Phys., 107, p. 09C305
  • Duhalde, S., Vignolo, M., Golmar, F., Chiliotte, C., Torres, C.R., Errico, L., Cabrera, A., Weissmann, M., (2005) Phys. Rev. B: Condens. Matter Mater. Phys., 72, p. 161313
  • Stearns, M.B., Cheng, Y., (1994) J. Appl. Phys., 75, pp. 6894-6899
  • Pang, H., Xuan, S., Liu, T., Gong, X., (2015) Soft Matter, 11, pp. 6893-6902

Citas:

---------- APA ----------
Mietta, J.L., Tamborenea, P.I. & Martin Negri, R. (2016) . Anisotropic magnetoresistivity in structured elastomer composites: Modelling and experiments. Soft Matter, 12(30), 6430-6441.
http://dx.doi.org/10.1039/c6sm01173j
---------- CHICAGO ----------
Mietta, J.L., Tamborenea, P.I., Martin Negri, R. "Anisotropic magnetoresistivity in structured elastomer composites: Modelling and experiments" . Soft Matter 12, no. 30 (2016) : 6430-6441.
http://dx.doi.org/10.1039/c6sm01173j
---------- MLA ----------
Mietta, J.L., Tamborenea, P.I., Martin Negri, R. "Anisotropic magnetoresistivity in structured elastomer composites: Modelling and experiments" . Soft Matter, vol. 12, no. 30, 2016, pp. 6430-6441.
http://dx.doi.org/10.1039/c6sm01173j
---------- VANCOUVER ----------
Mietta, J.L., Tamborenea, P.I., Martin Negri, R. Anisotropic magnetoresistivity in structured elastomer composites: Modelling and experiments. Soft Matter. 2016;12(30):6430-6441.
http://dx.doi.org/10.1039/c6sm01173j