Abstract:
In this work TiN and Ti-TiN bilayer coatings obtained with a vacuum arc on AISI 316 samples were proposed in order to improve hardness and tribological properties. The coatings were deposited with a DC cathodic arc running a 130 A current discharge between a Titanium cathode and the vacuum chamber employed as anode. The samples were placed 20 cm away from the cathode surface. TiN films were obtained employing a continuous nitrogen flux of ∼ 20 sccm and a working pressure in the range of 3 10-2 Pa. The structural and tribological properties were characterized by means of an optical microscope, scanning electron microscopy (SEM), x-ray diffraction (XRD), scratch test and fretting. The film thickness was about 0.5μm. Ti-TiN coatings presented better adhesion than TiN coatings and improved the fretting fatigue life compared to the untreated steel.
Registro:
Documento: |
Conferencia
|
Título: | Structural and tribological properties of Ti-TiN coatings obtained with a vacuum arc |
Autor: | Vaca, L.S.; Márquez, A.; Brühl, S.P. |
Ciudad: | Mar del Plata |
Filiación: | Grupo de Ingeniería de Superficies, Facultad Regional Concepción del Uruguay, Universidad Tecnológica Nacional, Argentina INFIP, UBA-CONICET, Cdad. Universitaria, C1428EGA Cdad. Autónoma de Buenos Aires, Argentina
|
Palabras clave: | Cathodes; Coatings; Electric discharges; Electrodes; Fatigue of materials; Scanning electron microscopy; Titanium compounds; Tribology; Vacuum applications; Vacuum technology; X ray diffraction; Bi-layer coatings; Cathode surface; Current discharge; Fretting fatigue lives; Nitrogen fluxes; Titanium cathode; Tribological properties; Working pressures; Titanium nitride |
Año: | 2012
|
Volumen: | 370
|
Número: | 1
|
DOI: |
http://dx.doi.org/10.1088/1742-6596/370/1/012032 |
Título revista: | 14th Latin American Workshop on Plasma Physics, LAWPP 2011
|
Título revista abreviado: | J. Phys. Conf. Ser.
|
ISSN: | 17426588
|
Registro: | https://bibliotecadigital.exactas.uba.ar/collection/paper/document/paper_17426588_v370_n1_p_Vaca |
Referencias:
- Kottel, C.M., Sprague, J.A., Smidt, F.A., (1994) ASM Handbook, 5. , Ohio: ASM International
- (1990) Metals Handbook, 1. , ASM International Handbook Committee Ohio: ASM International
- Sendriks, A.J., (1996) Corrosion of Stainless Steel, , 2nd Ed. (New York: Wiley & Sons)
- Rybiak, R., Fouvry, S., Liskiewicz, T., Wendler, B., (2007) Surf. Coat. Technol., 202, pp. 1753-1763
- Wu, P.-Q., Tang, B., Celis, J.-P., (2006) Surf. Coat. Technol., 201, pp. 413-417
- De Wit, E., Froyen, L., Celis, J.-P., (1998) Wear, 221, pp. 124-133
- Bruzzone, H., Kelly, H., Márquez, A., Lamas, D., Ansaldi, A., Oviedo, C., (1996) Plasma Source Sci. and Technol., 5, pp. 582-587
- Boxman, R.L., Martin, P.J., Sanders, D.M., (1995) Handbook of Vacuum Arc Science and Technology, , New Jersey: Noyes
- Krella, A., (2009) Surf. Coat. Technol., 204, pp. 263-270
- Chen, L., Wang, S.Q., Zhou, S.Z., Li, J., Zhang, Y.Z., (2008) Surf. Coat. Technol., 26, pp. 456-460
- Thao, Y., Lin, G., Xiao, J., Du, H., Dong, C., Gao, L., (2011) Appl. Surf. Sci., 257, pp. 2683-2688
- Puchi-Cabrera, E.S., Martínez, F., Herrera, J., Berríos, J.A., (2004) Surf. Coat. Technol., 182, pp. 276-286
- Liu, C., Yang, D., Lin, G., Qi, M., (2005) Mat. Lett., 59, pp. 3813-3819
- Liu, C., Lin, G., Yang, D., Qi, M., (2006) Surf. Coat. Technol., 200, pp. 4011-4016A4 - Agencia Nacional de Promocion Cientifica y Tecnologica (ANPCyT); Centro Latino-Americano de Fisica (CLAF); Comision Nacional de Energia Atomica (CNEA); Cons. Nac. Invest. Cient. Tec. (CONICET); et al.; Instituto de Fisica del Plasma (INFIP)
Citas:
---------- APA ----------
Vaca, L.S., Márquez, A. & Brühl, S.P.
(2012)
. Structural and tribological properties of Ti-TiN coatings obtained with a vacuum arc. 14th Latin American Workshop on Plasma Physics, LAWPP 2011, 370(1).
http://dx.doi.org/10.1088/1742-6596/370/1/012032---------- CHICAGO ----------
Vaca, L.S., Márquez, A., Brühl, S.P.
"Structural and tribological properties of Ti-TiN coatings obtained with a vacuum arc"
. 14th Latin American Workshop on Plasma Physics, LAWPP 2011 370, no. 1
(2012).
http://dx.doi.org/10.1088/1742-6596/370/1/012032---------- MLA ----------
Vaca, L.S., Márquez, A., Brühl, S.P.
"Structural and tribological properties of Ti-TiN coatings obtained with a vacuum arc"
. 14th Latin American Workshop on Plasma Physics, LAWPP 2011, vol. 370, no. 1, 2012.
http://dx.doi.org/10.1088/1742-6596/370/1/012032---------- VANCOUVER ----------
Vaca, L.S., Márquez, A., Brühl, S.P. Structural and tribological properties of Ti-TiN coatings obtained with a vacuum arc. J. Phys. Conf. Ser. 2012;370(1).
http://dx.doi.org/10.1088/1742-6596/370/1/012032