Abstract:
The effect of the amount of quartz powder in an epoxy resin matrix was studied by compression testing. Compressive tests near room temperature and at several strain rates were performed on samples with different filler volume fractions. The data show that both the composite Young's modulus and yield stress increase with increasing volume fraction of filler. The behaviour of the composite Young's modulus follows the Lewis and Nielsen model with a value for maximum packing fraction of the filler close to that for a random packaging of quartz particles inside the epoxy matrix. In order to understand the behaviour of the yield stress, a model with physical meaning was developed. The observed strengthening effects are explained by an alternative model related to thermal internal stress. © 2002 Society of Chemical Industry.
Registro:
Documento: |
Artículo
|
Título: | Yield stress of epoxy composites filled with quartz powder |
Autor: | Rubiolo, G.H.; Marconi, J.D.; Goyanes, S.N. |
Filiación: | LPMPyMC, Departamento de Física, Facultad Ciencias Exactas/Naturales, Buenos Aires 1428, Argentina CONICET, Buenos Aires, Argentina Departamento de Materiales, Comision Nacional Energia Atomica, Av Del Libertador 8250, Buenos Aires 1424, Argentina IFIMAT-Universidad Nacional de Ctr., Pinto 399, Tandil B7000GHG, Argentina
|
Palabras clave: | Compression yield stress; Particulate composite; Thermal internal stress; Young's modulus; Compression testing; Elastic moduli; Plastics fillers; Powders; Quartz; Strain rate; Volume fraction; Yield stress; Thermal internal stresses; Epoxy resins; composite; stress |
Año: | 2002
|
Volumen: | 51
|
Número: | 11
|
Página de inicio: | 1290
|
Página de fin: | 1294
|
DOI: |
http://dx.doi.org/10.1002/pi.928 |
Título revista: | Polymer International
|
Título revista abreviado: | Polym. Int.
|
ISSN: | 09598103
|
Registro: | https://bibliotecadigital.exactas.uba.ar/collection/paper/document/paper_09598103_v51_n11_p1290_Rubiolo |
Referencias:
- Gibson, R.F., (1994) Principles of Composites Materials Mechanics, pp. 1-33. , McGraw-Hill, Singapore
- Ahmed, S., Jones, F.R., (1990) J Mater Sci, 25, pp. 4933-4942
- Turcsányi, B., Pukanszky, B., Tudos, F., (1988) J Mater Sci Lett, 7, pp. 160-162
- Amdouni, N., Sautereau, H., Gerard, J.F., (1992) J Appl Polym Sci, 46, pp. 1723-1735
- d'Almeida, J.R.M., Monteiro, S.N., (1998) Composites Sci and Tech, 58, pp. 1593-1598
- Young, R.J., Beaumont, P.W.R., (1977) J Mater Sci, 12, pp. 684-692
- Nielsen, L.E., Landel, R.F., (1994) Mechanical Properties of Polymers and Composites, pp. 385-389. , 2nd ed, Marcel Decker Inc, New York, Chapter 7
- Sheldon, R.P., (1982) Composite Polymeric Materials, p. 95. , Applied Science Publishers, London, Chapter 4
- Lide, D.R., (1993) Handbook of Chemistry and Physics, p. 150. , CRC Press, London, Chapter 12
- Palumbo, M., Donzella, G., Tempesti, E., Ferruti, P., (1996) J Appl Polym Sci, 60, pp. 47-53
- Goyanes, S.N., Marconi, J.D., König, P.G., Martin, M.D., Mondragon, I., (2000) J of Alloys and Compounds, 310 (1-2 N), pp. 374-377
- Goyanes, S.N., König, P.G., Marconi, J.D., Mujika, F., Mondragon, I., (1999) Proceeding IV Simposio Argentino De Polímeros, 1, pp. 267-268
- Mori, T., Tanaka, K., (1973) Acta Met, 21, pp. 571-574
- Dieter, G.E., (1986) Mechanical Metallurgy, pp. 70-100. , 3rd edn, McGraw-Hill Inc, New York, Chapter 3
- Kaye, G.W.C., Laby, T.H., (1995) Tables of Physical and Chemical Constants, p. 75. , Longman, New York
- Mura, T., (1987) Micromechanics of Defects in Solids, pp. 74-88. , 2nd ed, Martins Nijhoff Publishers, Dordrecht, The Netherlands, Chapter 2
Citas:
---------- APA ----------
Rubiolo, G.H., Marconi, J.D. & Goyanes, S.N.
(2002)
. Yield stress of epoxy composites filled with quartz powder. Polymer International, 51(11), 1290-1294.
http://dx.doi.org/10.1002/pi.928---------- CHICAGO ----------
Rubiolo, G.H., Marconi, J.D., Goyanes, S.N.
"Yield stress of epoxy composites filled with quartz powder"
. Polymer International 51, no. 11
(2002) : 1290-1294.
http://dx.doi.org/10.1002/pi.928---------- MLA ----------
Rubiolo, G.H., Marconi, J.D., Goyanes, S.N.
"Yield stress of epoxy composites filled with quartz powder"
. Polymer International, vol. 51, no. 11, 2002, pp. 1290-1294.
http://dx.doi.org/10.1002/pi.928---------- VANCOUVER ----------
Rubiolo, G.H., Marconi, J.D., Goyanes, S.N. Yield stress of epoxy composites filled with quartz powder. Polym. Int. 2002;51(11):1290-1294.
http://dx.doi.org/10.1002/pi.928