Abstract:
This paper describes an apparatus which is able to perform tensile true constant stress or strain rate, stress-relaxation and creep tests on a thin strip specimen up to a maximum load of 20 N, in vacuum or in an inert atmosphere and at high temperature. The machine applies the load on the specimen by means of a balance beam, whose counterweight is partially submerged in a container filled with oil. The load, strain and temperature are measured with a load cell, a linear variable differential transformer and two thermocouples, respectively, and they are monitored by a personal computer through an analogue-digital interface. The computer-based control and data acquisition software was written in QBasic language and it works on the power stage through the digital outputs. The power stage consists of two pumps that change the fluid level in the container. The temperature on the specimen is achieved by using an electrical furnace controlled by a PID controller. The performance of the machine is illustrated with results on aluminium 3003 foil alloy and Fe73.5Si13.5-xAlxB9Cu 1Nb3 amorphous alloys.
Registro:
Documento: |
Artículo
|
Título: | A universal rig for mechanical testing of thin specimens using a novel loading assembly controlled by computer |
Autor: | Rubiolo, G.H.; Benites, G.M. |
Filiación: | Lab. Prop Mecanicas Poli. y Mat. C., Departamento de Física, Ciudad Universitaria (1428), Buenos Aires, Argentina Departamento Materiales, CNEA-CAC, Avenida del Libertador 8250 (1429), Buenos Aires, Argentina
|
Palabras clave: | Computer control; Creep testing; Loads (forces); Performance; Personal computers; Strain rate; Stress relaxation; Tensile testing; Thermal effects; Thin specimens; Test facilities |
Año: | 1997
|
Volumen: | 8
|
Número: | 2
|
Página de inicio: | 178
|
Página de fin: | 183
|
DOI: |
http://dx.doi.org/10.1088/0957-0233/8/2/011 |
Título revista: | Measurement Science and Technology
|
Título revista abreviado: | Meas. Sci. Technol.
|
ISSN: | 09570233
|
CODEN: | MSTCE
|
Registro: | https://bibliotecadigital.exactas.uba.ar/collection/paper/document/paper_09570233_v8_n2_p178_Rubiolo |
Referencias:
- Deng, D., Zheng, F., Xu, Y., Qi, G., Argon, S.A., Creep and structural relaxation in Pd40Ni40P20 glass (1993) Acta Metall., 41, pp. 1089-1107
- Hoffman, R.W., (1965) Physics of Thin Films, 3. , New York: Academic
- Kuhlmann-Wilsdorf, D., Srinivasa Raghavan, K., New tensile testing machine for thin specimens (1962) Rev. Sci. Instrum., 33, pp. 930-933
- Marsh, D.M., Micro-tensile testing machine (1961) J. Sci. Instrum., 38, pp. 229-234
- Menter, J.W., Pashley, D.W., (1959) Structure and Properties of Thin Films, p. 111. , New York: Wiley
- Schenk, A., Berka, L., Vasina, P., A new tensile tester for micro-scale strain measurements in the scanning electron microscope (1990) Meas. Sci. Technol., 1, pp. 136-138
- Shinohara, A.H., Sato, T., Saito, F., Tomioka, T., Arai, Y., A novel method for measuring direct compressive properties of carbon fibres using a micro-mechanical compression tester (1993) J. Mater. Sci., 28, pp. 6611-6616
- Stephens, R.R., Hoeppner, D.W., New apparatus for studying fatigue deformation at high magnifications (1988) Rev. Sci. Instrum., 58, pp. 1412-1419
- Taub, A.I., Spaepen, F., Isoconfigurational flow of amorphous Pd82Si18 (1979) Scri. Metall., 13, pp. 195-198
- Taub, A.J., Luborsky, F.E., Creep stress relaxation and structural change of amorphous alloys (1981) Acta Metall., 29, pp. 1948-1981
Citas:
---------- APA ----------
Rubiolo, G.H. & Benites, G.M.
(1997)
. A universal rig for mechanical testing of thin specimens using a novel loading assembly controlled by computer. Measurement Science and Technology, 8(2), 178-183.
http://dx.doi.org/10.1088/0957-0233/8/2/011---------- CHICAGO ----------
Rubiolo, G.H., Benites, G.M.
"A universal rig for mechanical testing of thin specimens using a novel loading assembly controlled by computer"
. Measurement Science and Technology 8, no. 2
(1997) : 178-183.
http://dx.doi.org/10.1088/0957-0233/8/2/011---------- MLA ----------
Rubiolo, G.H., Benites, G.M.
"A universal rig for mechanical testing of thin specimens using a novel loading assembly controlled by computer"
. Measurement Science and Technology, vol. 8, no. 2, 1997, pp. 178-183.
http://dx.doi.org/10.1088/0957-0233/8/2/011---------- VANCOUVER ----------
Rubiolo, G.H., Benites, G.M. A universal rig for mechanical testing of thin specimens using a novel loading assembly controlled by computer. Meas. Sci. Technol. 1997;8(2):178-183.
http://dx.doi.org/10.1088/0957-0233/8/2/011