Artículo
Abstract:
The results of qualitative and quantitative properties of clay based ceramic are presented in this work. Four different shaping methods and sintering temperatures were used to understand their influence in the final properties of a ceramic material formulated using kaolinite clay and calcined alumina. This material can be used as a structural ceramic for different applications, and there is no pre-established relation between the forming method and the final sintered properties. Forming methods used to prepare the samples were uniaxial pressing (a batch process that allows application in dry samples), extruding (a continuous process that requires moisture), slip casting (a process that allows to shape complex ceramic ware), and lamination (a batch process that requires moisture). Sintering temperatures were in the range of 1100 and 1400 °C. In order to compare how properties behave as the shaping method and sintering temperature change, textural properties, shrinkage, porosimetry, phase composition and mechanical strength were evaluated and analyzed. Scanning electron microscopy and microtomography were employed for analyzing and comparing the developed microstructures. Differences in the resulting properties are explained in terms of the developed crystalline phases and microstructure. © 2018 Associacao Brasileira de Ceramica. All rights reserved.
Registro:
| Documento: | Artículo |
| Título: | Comparative evaluation of properties of a clay based ceramic shaped via four techniques |
| Autor: | Torres, C.I.; Rendtorff, N.M.; Cipollone, M.; Aglietti, E.F.; Suárez, G. |
| Filiación: | Centro de Tecnología de Recursos Minerales y Cerámica (CIC PBA-CONICET La Plata), Con Centenario y 506 M.B. Gonnet (1897), Buenos Aires, Argentina Universidad Nacional de La Platal, Facultad de Ciencias Exactas, Departamento de Química, 47 y 115, La Plata, Buenos Aires, 1900, Argentina Y-TEC SA, Química Analítica Ensenada, Argentina |
| Palabras clave: | Clay based ceramics; Properties; Shaping; Sintering |
| Año: | 2018 |
| Volumen: | 64 |
| Número: | 370 |
| Página de inicio: | 176 |
| Página de fin: | 182 |
| DOI: | http://dx.doi.org/10.1590/0366-69132018643702270 |
| Título revista: | Ceramica |
| Título revista abreviado: | Ceramica |
| ISSN: | 03666913 |
| Registro: | https://bibliotecadigital.exactas.uba.ar/collection/paper/document/paper_03666913_v64_n370_p176_Torres |
Referencias:
- Beltran, V., Sanchez, E., García, J., Ferrando, F., (1996) Tile Brick Int., 12, p. 320
- Delbrouck, O., Janssen, J., Ottenburgs, R., Van Oyen, P., Viaene, W., (1993) Appl. Clay Sci., 8, p. 187
- Conconi, M.S., Gauna, M.R., Serra, M.F., Suarez, G., Aglietti, E.F., Rendtorff, N.M., (2014) Cerâmica, 60, p. 524
- Kitouni, S., Harabi, A., (2011) Cerâmica, 57, p. 453
- Castelein, O., Soulestin, B., Bonnet, J.P., Blanchart, P., (2001) Ceram. Int., 27, p. 517
- Mari, E.A., (1998) The Ceramic Materials, , Alsina, Buenos Aires
- Tecilazic-Stevanovic, M., Janackovic, T., Kostic-Gvozdenovisc, L.J., (1976) Proc. 3rd CIMTEC, p. 339. , Rimini, Italy
- Cotes, M.T., Martinez, C., Iglesias, F.J., Corpas, F.A., (2013) Bol. Soc. Esp. Ceram. V., 52, p. 169
- Romero, M., Pérez, J.M., (2015) Mater. Constr., 65 (320), p. e065
- Ribeiro, M.J., Tulyaganov, D.U., Ferreira, M.F.J., Labrincha, J.A., (2004) J. Mater. Proc. Technol., 148, p. 139
- Souza, G.P., Sanchez, R., De Holanda, J.N.F., (2002) Cerâmica, 48, p. 102
- Teixeira, S.R., De Souza, S.A., Moura, C.A.I., (2001) Cerâmica, 47, p. 204
- Manoharan, C., Sutharsan, P., Dhanapandian, S., Venkatachalapathy, R., (2012) Cerâmica, 58, p. 412
- Soauza, A.E., Teixeira, S.R., Santos, G.T.A., Longo, E., (2013) Cerâmica, 59, p. 147
- João, B., Neto, R., Moreno, R., (2008) Appl. Clay Sci., 38, p. 209
- Conserva, L.R.S., Melchiades, F.G., Nastri, S., Boschi, A.O., Dondi, M., Guarini, G., Raimindo, M., Zanelli, C., (2016) J. Eur. Ceram. Soc., 37, p. 333
- Zanelli, C., Raimondo, M., Guarini, G., Dondi, M., (2011) J. Non-Cryst. Solids, 357, p. 3251
- Glass, S.J., Ewsuk, K.G., (1997) MRS Bull., 22, p. 24
- Garino, T., Readey, M.J., Mahoney, F.M., Ewsuk, K.G., Gieske, J., Stoke, G.R., (1995) Int. SAMPE Tech. Conf, (27), p. 610
- Mahoney, F.M., Readey, M.J., (1995) Int. SAMPE Tech. Conf, (27), p. 645
- Schneider, H., Komarneni, S., (2005) Mullite, , Wiley-VCH, Weinheim
- Diamond, S., (1970) Clays Clay Miner., 18, p. 7
- Roosen, A., Bowen, H.K., (1988) J. Am. Ceram. Soc., 71, p. 970
- Hubadillah, S.K., Harun, Z., Othman, M.H.D., Ismail, A.F., Gani, P., (2016) J. Asian Ceram. Soc., 4, p. 164
- Amigó, J.M., Clausell, J.V., Esteve, V., Delgado, J.M., Reventós, M.M., Ochando, L.E., Debaerdemaeker, T., Martí, F., (2004) J. Eur. Ceram. Soc., 24, p. 75
- Klemm, Y., Biermann, H., Aneziris, C.G., (2013) Ceram. Int., 39, p. 6695
Citas:
---------- APA ----------
Torres, C.I., Rendtorff, N.M., Cipollone, M., Aglietti, E.F. & Suárez, G. (2018) . Comparative evaluation of properties of a clay based ceramic shaped via four techniques. Ceramica, 64(370), 176-182.http://dx.doi.org/10.1590/0366-69132018643702270
---------- CHICAGO ----------
Torres, C.I., Rendtorff, N.M., Cipollone, M., Aglietti, E.F., Suárez, G. "Comparative evaluation of properties of a clay based ceramic shaped via four techniques" . Ceramica 64, no. 370 (2018) : 176-182.http://dx.doi.org/10.1590/0366-69132018643702270
---------- MLA ----------
Torres, C.I., Rendtorff, N.M., Cipollone, M., Aglietti, E.F., Suárez, G. "Comparative evaluation of properties of a clay based ceramic shaped via four techniques" . Ceramica, vol. 64, no. 370, 2018, pp. 176-182.http://dx.doi.org/10.1590/0366-69132018643702270
---------- VANCOUVER ----------
Torres, C.I., Rendtorff, N.M., Cipollone, M., Aglietti, E.F., Suárez, G. Comparative evaluation of properties of a clay based ceramic shaped via four techniques. Ceramica. 2018;64(370):176-182.http://dx.doi.org/10.1590/0366-69132018643702270
