Artículo

Estamos trabajando para incorporar este artículo al repositorio
Consulte la política de Acceso Abierto del editor

Abstract:

Samples of cured medium cis polybutadiene compound, formulated with sulphur and accelerator and vulcanized at 433 K, were prepared at different cure times in order to obtain different network structures. Uniaxial stress strain tests were performed at room temperature and analyzed in the frame of the tube model and the molecular weight between crosslinks was obtained. Swelling tests in toluene at room temperature were made in the same samples and the volume fraction of rubber was calculated in each case. By means of the Flory-Rehner relationship and using the molecular weight between crosslinks, the Flory's parameter χ was estimated for the polybutadiene/toluene system. © 2010 Universidad Simón Bolívar (Venezuela).

Registro:

Documento: Artículo
Título:Influence of the reticulation structure on the coefficiency of Flory interaction in polybutadiene/toluene system
Autor:Marzocca, A.J.; Goyanes, S.; Garraza, A.L.R.
Filiación:Universidad de Buenos Aires, Facultad de Ciencias Exactas y Naturales, Departamento de Física, LPMPyMC, Pabellón 1, Buenos Aires (C1428EGA), Argentina
Consejo Nacional de Investigaciones Científicas y Técnicas (CONICET), Argentina
Palabras clave:Polybutadiene rubber; Swelling; Toluene; Vulcanization
Año:2010
Volumen:30
Número:1
Página de inicio:67
Página de fin:72
Título revista:Revista Latinoamericana de Metalurgia y Materiales
Título revista abreviado:Rev. Latinoam. Met. Materiales
ISSN:02556952
Registro:https://bibliotecadigital.exactas.uba.ar/collection/paper/document/paper_02556952_v30_n1_p67_Marzocca

Referencias:

  • Marzocca, A.J., (2007) European Polym. J., 43, pp. 2682-2689
  • Flory, P.J., Rehner, J., (1943) J. Chem. Phys., 11, pp. 512-520
  • Hergenrother, W.T., (1972) J. Appl. Polym. Sci., 16, pp. 2611-2622
  • Scott, R.L., Magat, M., (1949) J. Polym. Sci., 4, pp. 555-571
  • Short, J., Thornton, V., Kraus, G., (1957) Rubber Chem. Technol., 30, pp. 1118-1141
  • Kraus, G., (1963) J. Appl. Polym. Sci., 7, pp. 1257-1263
  • Gavrilov, V.M., Shvarts, A.G., (1974) Rubber Chem. Technol., 47, pp. 303-306
  • Heinrich, G., Straube, E., Helmis, G., (1988) Adv. Polym. Sci., 85, pp. 33-87
  • Heinrich, G., Vilgis, T.A., (1993) Macromolecules, 26, pp. 1109-1119
  • Marzocca, A.J., Goyanes, S., (2004) J. Appl. Polym. Sci., 91, pp. 2601-2609
  • Marzocca, A.J., (1995) J. Appl. Polym. Sci., 58, pp. 1839-1845
  • Marzocca, A.J., Cerveny, S., Raimondo, R.B., (1997) J. Appl. Polym. Sci., 66, pp. 1085-1092
  • Cerveny, S., Marzocca, A.J., (1999) J. Appl. Polym. Sci., 74, pp. 2747-2755
  • (1997) CRC Handbook of Chemistry and Physics, pp. 3-55. , Lide DR, editor, 78th ed., New York, CRC Press
  • Gronski, W., Hoffmann, V., Simon, G., Wutzler, A., Straube, E., (1991) Rubber Chem. Technol., 65, pp. 63-77
  • Clough, R.S., Koenig, J.L., (1989) Rubber Chem. Technol., 62, pp. 908-927
  • Posh, B.T., Adachi, K., Kotaka, T., (1987) Macromolecules, 20, pp. 2574-2579

Citas:

---------- APA ----------
Marzocca, A.J., Goyanes, S. & Garraza, A.L.R. (2010) . Influence of the reticulation structure on the coefficiency of Flory interaction in polybutadiene/toluene system . Revista Latinoamericana de Metalurgia y Materiales, 30(1), 67-72.
Recuperado de https://bibliotecadigital.exactas.uba.ar/collection/paper/document/paper_02556952_v30_n1_p67_Marzocca [ ]
---------- CHICAGO ----------
Marzocca, A.J., Goyanes, S., Garraza, A.L.R. "Influence of the reticulation structure on the coefficiency of Flory interaction in polybutadiene/toluene system " . Revista Latinoamericana de Metalurgia y Materiales 30, no. 1 (2010) : 67-72.
Recuperado de https://bibliotecadigital.exactas.uba.ar/collection/paper/document/paper_02556952_v30_n1_p67_Marzocca [ ]
---------- MLA ----------
Marzocca, A.J., Goyanes, S., Garraza, A.L.R. "Influence of the reticulation structure on the coefficiency of Flory interaction in polybutadiene/toluene system " . Revista Latinoamericana de Metalurgia y Materiales, vol. 30, no. 1, 2010, pp. 67-72.
Recuperado de https://bibliotecadigital.exactas.uba.ar/collection/paper/document/paper_02556952_v30_n1_p67_Marzocca [ ]
---------- VANCOUVER ----------
Marzocca, A.J., Goyanes, S., Garraza, A.L.R. Influence of the reticulation structure on the coefficiency of Flory interaction in polybutadiene/toluene system . Rev. Latinoam. Met. Materiales. 2010;30(1):67-72.
Available from: https://bibliotecadigital.exactas.uba.ar/collection/paper/document/paper_02556952_v30_n1_p67_Marzocca [ ]