Abstract:
The power requirements of a liquid-fluidized bed working in optimal conditions of transfer related to those needed at minimum fluidization and the ratio of mass-transfer rates obtained in these conditions are analyzed as functions of the Archimedes number. © 1985, American Chemical Society. All rights reserved.
Registro:
Documento: |
Artículo
|
Título: | Maximum Liquid-to-Wall Mass Transfer in Fluidized Beds: Energetic Aspects |
Autor: | Gagliardino, D.A.; Ursula Böhm, U. |
Filiación: | Departamento de Industrias, Universidad de Buenos Aires, Ciudad Universitaria, 1428, Buenos Aires, Argentina
|
Palabras clave: | MASS TRANSFER; ARCHIMEDES NUMBER; ENERGY COSTS; FLUIDIZING VELOCITY; CHEMICAL OPERATIONS |
Año: | 1985
|
Volumen: | 24
|
Número: | 3
|
Página de inicio: | 888
|
Página de fin: | 889
|
DOI: |
http://dx.doi.org/10.1021/i200030a062 |
Título revista: | Industrial and Engineering Chemistry Process Design and Development
|
Título revista abreviado: | Ind. Eng. Chem. Process. Des. Dev.
|
ISSN: | 01964305
|
Registro: | https://bibliotecadigital.exactas.uba.ar/collection/paper/document/paper_01964305_v24_n3_p888_Gagliardino |
Referencias:
- Böhm, U., (1983) Ind. Eng. Chem. Process Des. Dev., 22, p. 339
- Coeuret, F., Storck, A., Elements de Genie Electrochimique (1984) Technique et Documentation, , In (Lavoisier): Paris, Chapter 7
- Godard, K.E., Richardson, J.F., (1969) Chem. Eng. Sci., 24, p. 263
- Jagannadharaju, G.J.V., Venkata Rao, C., (1985) Indian J. Technol., 3, p. 201
- King, D.H., (1970) University of Toronto, , Ph.D. Thesis, Ontario, Canada
- Martin, H., (1980) Chem. Ing. Tech., 52, p. 199
- Richardson, J.F., Fluidization (1971), In Davidson, J. F., Harrison, D., Eds.; Academic Press: New York, Chapter 2; Richardson, J.F., Zakl, W.N., (1954) Trans. Inst. Chem. Eng., 32, p. 38
- Tonini, R.D., Böhm, U., Brea, F.M., (1981) Chem. Eng. J., 22, p. 51
- Xifra, H., Böhm, U., (1975) Lat. Am. J. Chem. Eng. Appl. Chem., 5, p. 39
Citas:
---------- APA ----------
Gagliardino, D.A. & Ursula Böhm, U.
(1985)
. Maximum Liquid-to-Wall Mass Transfer in Fluidized Beds: Energetic Aspects. Industrial and Engineering Chemistry Process Design and Development, 24(3), 888-889.
http://dx.doi.org/10.1021/i200030a062---------- CHICAGO ----------
Gagliardino, D.A., Ursula Böhm, U.
"Maximum Liquid-to-Wall Mass Transfer in Fluidized Beds: Energetic Aspects"
. Industrial and Engineering Chemistry Process Design and Development 24, no. 3
(1985) : 888-889.
http://dx.doi.org/10.1021/i200030a062---------- MLA ----------
Gagliardino, D.A., Ursula Böhm, U.
"Maximum Liquid-to-Wall Mass Transfer in Fluidized Beds: Energetic Aspects"
. Industrial and Engineering Chemistry Process Design and Development, vol. 24, no. 3, 1985, pp. 888-889.
http://dx.doi.org/10.1021/i200030a062---------- VANCOUVER ----------
Gagliardino, D.A., Ursula Böhm, U. Maximum Liquid-to-Wall Mass Transfer in Fluidized Beds: Energetic Aspects. Ind. Eng. Chem. Process. Des. Dev. 1985;24(3):888-889.
http://dx.doi.org/10.1021/i200030a062