Navegar

Colección

Datos Estadísticas

Artículo

El editor solo permite decargar el artículo en su versión post-print desde el repositorio. Por favor, si usted posee dicha versión, enviela a
Consulte el artículo en la página del editor
Consulte la política de Acceso Abierto del editor

Abstract:

The dynamic mechanical properties of epoxy composites filled with different amounts of quartz powder were investigated. The storage modulus and loss tangent were measured at frequencies between 7.8 and 323 Hz from room temperature up to 460 K. The influence of the filler content on the temperature and frequency behavior of the dynamic mechanical properties is discussed and explained in terms of models presented in the literature. In particular, the dependence of the composite damping with the quartz content is explained with regard to damping due to particle-particle and polymer-particle interaction. Also, the glass-transition temperature as a function of filler content was obtained and was related to the results obtained for the apparent activation energies of the α relaxation, which were estimated with the Williams, Landel, and Ferry equation. © 2003 Wiley Periodicals, Inc.

Registro:

Documento: Artículo
Título:Dynamic mechanical analysis of particulate-filled epoxy resin
Autor:Goyanes, S.N.; König, P.G.; Marconi, J.D.
Filiación:LPMPyMC, Ciudad Universitaria, Universidad Nacional de Buenos Aires, Buenos Aires 1428, Argentina
Consejo Nac. de Invest. Cie. y Tec., Buenos Aires, Argentina
Palabras clave:Activation energy; Composite materials; Damping; Dynamic mechanical analysis; Glass transition; Polymers; Powders; Quartz; Storage modulus; Epoxy resins; composite; epoxy resin; mechanical property; powder
Año:2003
Volumen:88
Número:4
Página de inicio:883
Página de fin:892
DOI: http://dx.doi.org/10.1002/app.11678
Título revista:Journal of Applied Polymer Science
Título revista abreviado:J. Appl. Polym. Sci.
ISSN:00218995
CODEN:JAPNA
Registro:https://bibliotecadigital.exactas.uba.ar/collection/paper/document/paper_00218995_v88_n4_p883_Goyanes

Referencias:

  • Nielsen, L.E., Landel, R.F., (1994) Mechanical Properties of Polymers and Composites, , Ochiai, S., Ed.; Marcel Dekker: New York; Chapter 7
  • Sheldon, R.P., (1982) Composite Polymeric Materials, , Applied Science: London; Chapters 2 and 3
  • Gibson, R.F., (1994) Principles of Composite Materials Mechanics, , McGraw-Hill: New York; Chapter 8
  • Hancock, M., (1995) Particulate-Filled Polymer Composites, , Rothon, R., Ed.; Longman Scientific & Technical: Essex, England; Chapter 8
  • Amdouni, N., Sauterau, H., Gerard, J.F., (1992) J Appl Polym Sci, 45, p. 1799
  • Diez-Gutiérrez, S., Rodriguez-Pérez, M.A., De Saja, J.A., Velazco, J.I., (1999) Polymer, 40, p. 5345
  • Cerveny, S., Goyanes, S.N., Marzocca, A.J., Rubiolo, G.H., (1999) Polymer, 40, p. 1495
  • Goyanes, S.N., Marconi, J.D., König, P.G., Martín, M.D., Mondragón, I., (2000) J Alloys Comp, 310, p. 374
  • Yu, S., Hing, P., (2000) J Appl Polym Sci, 78, p. 1348
  • Young, S.K., Mauritz, K.A., (2001) J Polym Sci Part B: Polym Phys, 39, p. 1282
  • Ferry, J.D., (1980) Viscoelastic Properties of Polymers, , Wiley: New York; Chapter 11
  • Lide, D.R., (1993) CRC Handbook of Chemistry and Physics, p. 150. , CRC: Boca Raton, FL; Chapter 12
  • Lee, B.L., Nielsen, L.E., (1977) J Polym Sci Polym Phys Ed, 15, p. 683
  • Alberola, N.D., Mele, P., (1996) Polym Compos, 17, p. 751
  • Striker, F., Maier, R.D., Bruch, M., Thomann, R., Mülhaupt, R., (1990) Polymer, 40, p. 2077
  • Lagacos, N., Jarzynski, J., Cole, J.H., Bucaro, J.A., (1986) J Appl Phys, 59, p. 4017
  • Nielsen, L.E., (1969) Trans Soc Rheol, 13, p. 141
  • Morgan, R., (1997) Thermal Characterization of Composites in Thermal Characterization of Polymeric Materials, , Turi, A., Ed.; Academic: New York; Chapter 9
  • Zorowski, C.F., Murayama, T., (1972) Proc 1st Int Conf on Mech Behav of Mater, , Soc of Mater Sci: Kyoto, Japan; Chapter 5
  • Gu, W., (1997), Ph.D. Thesis, Virginia Polytechnic Institute

Citas:

---------- APA ----------
Goyanes, S.N., König, P.G. & Marconi, J.D. (2003) . Dynamic mechanical analysis of particulate-filled epoxy resin. Journal of Applied Polymer Science, 88(4), 883-892.
http://dx.doi.org/10.1002/app.11678
---------- CHICAGO ----------
Goyanes, S.N., König, P.G., Marconi, J.D. "Dynamic mechanical analysis of particulate-filled epoxy resin" . Journal of Applied Polymer Science 88, no. 4 (2003) : 883-892.
http://dx.doi.org/10.1002/app.11678
---------- MLA ----------
Goyanes, S.N., König, P.G., Marconi, J.D. "Dynamic mechanical analysis of particulate-filled epoxy resin" . Journal of Applied Polymer Science, vol. 88, no. 4, 2003, pp. 883-892.
http://dx.doi.org/10.1002/app.11678
---------- VANCOUVER ----------
Goyanes, S.N., König, P.G., Marconi, J.D. Dynamic mechanical analysis of particulate-filled epoxy resin. J. Appl. Polym. Sci. 2003;88(4):883-892.
http://dx.doi.org/10.1002/app.11678