Artículo

Resumen:

En el presente trabajo se diseña, construye y se pone a punto un susceptómetro adecuado para la medición de la temperatura de Curie Tc de materiales fácilmente oxidables, como es el caso de los imanes de Nd-Fe-B. El principio en que se basa el método es el de medir la variación térmica de la susceptibilidad de los materiales magnéticos en campo alterno débil y determinar Tc a partir de esa variación. El sistema consta esencialmente de una bobina captora y una balanceadora ubicadas en el interior de una bobina mayor que produce un campo magnético H alterno. Todo el conjunto de medición se halla en el interior de un recipiente en el que se realiza vacío y que permite variar la temperatura desde temperatura ambiente hasta cerca de los 800°C. El sistema se calibró con una muestra de Ni y está siendo utilizado para la medición de temperatura de Curie en imanes de Nd-Fe-B. El sistema es confiable, fácil de usar y proporciona valores precisos de la temperatura de Curie

Abstract:

The design and construction of susceptometer adapted for measuring the Curie temperature T of highly reactive materials is presented. The method of measurement is based on the thermal variation of the susceptibility of magnetic materials in weak, alternating magnetic fields. T is measured from that variation. The system consist esentially of a pair of opposite pick-up coils within a larger coil that produces an alternating magnetic field H. The sample is held inside one of the coils and all the measurement system il located within a vacum chamber. The sample is heated by a resistence heater and sample temperature can be varied up to 800°C, approximately. A Ni sample was used to calibrate the system and the susceptometer is being used to measure T ̧ of Nd-Fe- B magnets. The system proved to be reliable, easy to use and provide a precise value of Curie temperature.

Registro:

Título:Sistema de medición de temperatura de Curie en materiales facilmente oxidables
Autor:Lehz, H.; Bertorello, Héctor Raúl
Fecha:1993
Título revista:Anales AFA
Editor:Asociación Física Argentina
Handle: http://hdl.handle.net/20.500.12110/afa_v05_n01_p477
Ciudad:Villa Martelli, Buenos Aires
Idioma:Español
Año:1993
Volumen:05
Número:01
Título revista abreviado:An. (Asoc. Fís. Argent., En línea)
ISSN:1850-1168
Formato:PDF
PDF:https://bibliotecadigital.exactas.uba.ar/download/afa/afa_v05_n01_p477.pdf
Registro:https://bibliotecadigital.exactas.uba.ar/collection/afa/document/afa_v05_n01_p477

Citas:

---------- APA ----------
Lehz, H. & Bertorello, Héctor Raúl(1993). Sistema de medición de temperatura de Curie en materiales facilmente oxidables. Anales AFA, 05(01), 477-479.
---------- CHICAGO ----------
Lehz, H., Bertorello, Héctor Raúl "Sistema de medición de temperatura de Curie en materiales facilmente oxidables" . Anales AFA 05, no. 01 (1993): 477-479.
---------- MLA ----------
Lehz, H., Bertorello, Héctor Raúl "Sistema de medición de temperatura de Curie en materiales facilmente oxidables" . Anales AFA, vol. 05, no. 01, 1993, pp. 477-479.
---------- VANCOUVER ----------
Lehz, H., Bertorello, Héctor Raúl Sistema de medición de temperatura de Curie en materiales facilmente oxidables. An. (Asoc. Fís. Argent., En línea). 1993;05(01): 477-479 . Available from: https://bibliotecadigital.exactas.uba.ar/collection/afa/document/afa_v05_n01_p477